TONER

TONER -material is available in white and clear.

stafix_download_product_manual_11_2016_eng

Product properties

STAFIX®GRIP is a glue-free sticker material that adheres to various clean and very smooth surfaces with a silicon adhesion layer.
The material is removable without leaving any residue and reusable even up to 12 months. The material adheres on the unprinted side only.

STAFIX®GRIP TONER is available in white and clear, and comes in sheets.
STAFIX®GRIP TONER material has a special receptive coating for TONER inks, the coating allows excellent ink transferability and ink adhesion.

SHELF LIFE
In the sealed original package, the unprinted PET material can be stored up to 24 months


Product data

PACKAGING & FORMATS

 

FORMATSHEETS / BOXSHEETS / PALLET
320 x 450mm 1004000
PRODUCT DATA
WHITECLEAR
FILMLINERFILMLINER
Weight (g/m2)1507018070
Thickness (µm)1155014050
Total Weight (g/m2)220250
Total Thickness (µm)165190
MaterialPETPET
FinishingWhite glossUltra Clear
Working Temperature-30 °C to 130 °C-30°C to 130°C
180° Peel strength (g/25mm)2-102-10
RecyclabilityGrade 1 plasticGrade 1 plastic
Shelf life24 months24 months
Stafix® Product codeGR-115PETW50.2.GR-140PETC50.2

FORMAT TOLERANCE
Sheets: 0,5% in length and width


Storage

Store the unwrapped STAFIX®GRIP in the original package at 25% to 50% relative humidity and 15°C to 25°C temperature. The material should remain sealed in the original wrap until the STAFIX®GRIP material has warmed up to print-room temperature.
Print-room recommended relative humidity is 50% to 60% and temperature is 18°C to 30°C. After use re-seal the remaining unused material in the original package. Proper acclimatization allows for better feeding through the press.

 STORAGE CONDITIONSPRINTING CONDITIONS
Humidity25% to 50%50% to 60%
Temperature15°C to 25°C 18°C to 30°C

The warming-up time depends on the pallet weight and the temperature difference between the warehouse and the print-room, see table below for more details:

PACKAGINGWEIGHTTEMPERATURE DIFFERENCE (°C)
FORMATKG (APPROX)10°15°20°25°30°35°40°HOURS
320 x 450 mm (SRA3)4 kg11112222

Once the STAFIX®GRIP TONER sheets have reached the same temperature as the print room you can open the boxes. Let the material acclimatize with the open box for 2 hours prior to printing for better runnability and efficient feeding. After use, repack the remaining unused material in the original package.

stafix_download_product_manual_11_2016_eng
Always run a test with before printing a commercial job, specially for the first time printing on STAFIX®GRIP
STAFIX®GRIP TONER is compatible with machines such as:

  • Ricoh Pro C751 / C7110SX
  • Canon imageRUNNER 6000
  • Canon ImagePress C6010VP/ C7010VP
  • Konica Minolta Bizhub Press C1070 / C1085 / C1100
  • Xerox Color 560 / 570 / 700 / 770 / 1000i / J75
  • Xerox Versant 2100

The product is compatible with several other models. To confirm the compatibility with your specific model, please contact Stafix Ltd or your supplier of STAFIX® material.
We recommend testing the material before using with any other model not mentioned above.


Static build

Synthetic materials can build static charge during printing on dry toner presses, especially when printing longer runs.
The static build in plastics can be managed by a combination of effective grounding, ionization, and proper humidity/temperature control.
For larger runs is recommended to use an ionization system to eliminate the static build.
If ionization system is not available use a metal core tinsel to dissipate the static by induction. The tinsel should be attached to a properly grounded press or another conductive object.
Make sure the press is properly grounded.

Post-press

STAFIX®GRIP TONER can be die-cut and kiss-cut. Always round the corners when die-cutting or kiss cutting because the inner-sharp corners might cause the film to tear, Perforating, binding and direct mail inserting is also possible. When trimming, use sharp, nick-free blades.

PACKING & SHIPPING
Protect the products well from dust when sending the finished goods to your client. Pack the material flat and do not fold the sheets.